QSC PLX-3002
- Ultra-high-perfomance, ultra-high-reliability, ultra-low-noise PowerWave™ technology made even more affordable
- Perfect for sound reinforcement, night clubs, DJs, musicians, equipment rentals, and installations
- Detented gain controls
- DIP switch control of independent clip limiters (in or out), low frequency roll-off filters (in/out and frequency), bridging, and parallel operation
- Front panel LED indicators for signal metering, clipping, protect, parallel inputs, and bridged mono mode
- Zero inrush current at turn-on
- Class H complementary bipolar output circuitry for high efficiency
- Variable-speed fan cooling with back-to-front air flow
- 2 rack spaces high
- 13.25 inches deep
- Only 21 pounds
- Integral handles
- DC, infrasonic, and thermal overload protection
- Patented Output Averaging(tm) short circuit protection
- XLR and 1/4" TRS input connectors
- Neutrik Speakon(tm) and "Touchproof" binding post output connectors
- 3 year warranty PLUS optional 3 year extended service contract
Output Power (per channel):
Continuous Average Output Power Both Channels Driven:
8W, 20 Hz to 20 kHz, 0.03% THD, 550 watts
4W, 20 Hz to 20 kHz, 0.05% THD, 900 watts
2W, 1 kHz, 1% THD, 1500 watts
Continuous Average Output Power Bridge Mono Operation:
16W, 20 Hz to 20 kHz, 0.1% THD, 1100 watts
8W, 20 Hz to 20 kHz, 0.1% THD, 2000 watts
4W, 1 kHz, 1% THD, 3000 watts
DISTORTION (SMPTE-IM): less than 0.02%
DISTORTION (typical): less than 0.01% THD, 4W & 8W
20Hz-20kHz: 10 dB below rated power
1.0 kHz and below: full rated power
FREQUENCY RESPONSE:
20 Hz to 20 kHz, ±0.2 dB
8 Hz to 50 kHz, +0/-3 dB
DAMPING FACTOR (1 kHz and below):
500 or greater
NOISE: 107 dB below rated output (20 Hz to 20 kHz)
SENSITIVITY:
1.7 Vrms (+6.6 dBu) for rated power @ 8W,
1.5 Vrms (+5.7 dBu) for rated power @ 4W
CONTROLS:
- Front:
- AC Switch, Ch 1 and Ch 2 Gain Knobs
- Rear:
- DIP Switch:
CH1 clip limiter on/off,
CH1 LF filter on/off,
CH1 LF filter 30/50 Hz freq select;
CH2 clip limiter on/off,
CH2 LF filter on/off,
CH2 LF filter 30/50 Hz freq select;
Inputs parallel or stereo;
Bridged mode
VOLTAGE GAIN: 40x (32 dB)
INPUT IMPEDANCE: 6K unbalanced, 12K
balanced
INDICATORS:
| CLIP/PROT | | Red LED (1 per ch.) |
| LEVEL -10 dB | | Green LED (1 per ch.) |
| LEVEL -20 dB | | Green LED (1 per ch.) |
| SIGNAL -35 dB | | Green LED (1 per ch.) |
| BRIDGED | | Yellow LED |
| PARALLEL INPUTS | | Yellow LED |
| POWER ON | | Green LED |
CONNECTORS: (each channel)
- Input:
- 1/4" TRS (tip hot) and 3-pin XLR (pin 2 hot)
- Output:
- Neutrik Speakon and dual "Touchproof" 5-way binding posts
COOLING: Variable speed fan, rear-to-front air flow through tunnel heatsink.
AMPLIFIER PROTECTION:
Full short circuit, open circuit, thermal, ultrasonic, and
RF protection. Stable into reactive or mismatched loads.
LOAD PROTECTION:
On/off muting, DC-fault power supply shut down.
OUTPUT CIRCUITRY:
Two-step Class H complementary bipolar.
POWER REQUIREMENTS:
12 Amps (pink noise, 1/8 rated average power at 4W).
DIMENSIONS:
19.0" (48.3 cm) rack mounting
3.5" (8.9 cm) tall (2 rack spaces)
13.25" (33.7 cm) deep (from front mounting rails)
WEIGHT: 21 Ibs (9.5 kg) net
List: $1,798.00
OUR PRICE: Email for
Price
TO ORDER: CALL 1-800-793-5308
or click here 
to order by mail
Return To
 |
